shelolab SM10HP-2, Installation And Operation Manual

Page: 6 / 44

6 | P a g e
RECEIVING YOUR OVEN
Before leaving the factory, all ovens are packaged in high-quality shipping materials to provide
protection from transportation-related damage. When a unit departs our factory, safe delivery
becomes the responsibility of the carrier. Damage sustained during transit is not covered by the
manufacturing defect warranty.
This makes it important that you inspect your oven for concealed loss or damage to its interior and
exterior when receiving it.
If you find any damage to the unit, follow the carrier’s procedure for
claiming damage or loss.
The orientation photos on the immediately following pages may serve as useful references when
inspecting the oven.
Carefully check all packaging before discarding. Save the shipping carton until you are certain that
the unit and its accessories function properly.
I
NSPECTING THE
S
HIPMENT
Carefully inspect the shipping carton for damage. Report any damage to the carrier service that
delivered the SMOHP oven. If the carton is not damaged, open the carton and remove the
contents. The unit should come with an Installation and Operation Manual, and a Certificate of
Compliance.
Verify that the correct number of shelves, shelf slides, and leveling feet have been included (see
the following table for quantities).
Included accessories
Model Shelves Shelf Slides / Clips Leveling Feet
SMO10HP-2 3 12 Clips 4
SMO14HP-2 6 24 Clips 4
SMO34HP-2 6 24 Clips 4
SMO38HP-2 12 48 Clips 4
Carefully check all packaging before discarding. Save the shipping carton until you are certain that
the unit and its accessories function properly.