Version 1.0.4 dated 2014-09-19
Page 28
Original operating instructions
4.6.2 Grinding device turning tool
In order to assemble the grinding device for milling cutters and turning tools it is necessary to
disassemble the grinding device for single edge milling cutters.
To remove the mounted grinding device for single edge milling cutters (burin):
Release the clamping lever (45) and the knurled screw (46).
Pull the grinding device over the dovetail guide.
Make sure that the V-ledge does not fall down. If required reset the V-ledge for the devices.
Img.4-6: Device single edge milling cutter
Img.4-7: Device HSS turning tool
44
45
46
48
30
