manualshive.com logo in svg

shars 101-1008, Operating Manual

Share
Download
shars 101-1008 Operating Manual Download Page 13

SHARS Maschinen Germany GmbH 

Version 1.0.4  dated 2014-09-19

Page 13

Original operating instructions

Inform the supervisor about all endangerments or errors.

1.12

Accident report

Inform your superiors and 

immediately in the event of

accidents, possible sources of danger and any actions which almost led to an accident (near
misses).

There are many possible causes for "near misses". 

The sooner they are notified, the faster the causes can be eliminated.

INFORMATION

We highlight specific dangers when performing works on the grinding machine for burins and
tools in the description of that work.

1.13

Electrical system



 "Schaltplan - Wiring diagram 400V“ on page 38



 "Schaltplan - Wiring diagram 230V“ on page 39

Have the machine and/or the electrical equipment checked regularly, at least every six months.

Immediately eliminate all defects such as loose connections, defective wires, etc.

A second person must be present during work on live components to disconnect the power in
the event of an emergency.

Immediately disconnect the grinding machine for burins and tools if there are any anomalies in
the power supply!

Summary of Contents for 101-1008















































Reviews:

No comments

Brands by name

Popular brands

Load more brands