Sharp Zaurus SL-5500 Service Manual Download

Page: 58 / 84

PC-UM10M

SL-5500 DIAGNOSTICS AND CHECK ITEMS

– 57 –

2) TEST PROCEDURES OF STEREO HEADPHONE/MICROPHONE/SOUNDER

Test by Diag

3) SD CARD SLOT TEST

Test by OS

Prepare data in the built-in memory of the machine.

MP3 music data will be OK.

Insert an SD card.

Check that the SD card icon is indicated on the task bar.

If the SD card icon is not indicated on the task bar, remove the SD

card and insert it again and check the icon.

Copy the data in the machine to the SD card.

If copying is performed normally, it is OK.

For operating procedures, refer to the Operation Manual.

4) USB PORT TEST (SOME OF SHARP I/O PORTS

(16PIN CONNECTOR))

Test by OS

Preparation

Docking Station

Personal computer with USB support (Win98 or later)

(The USB driver and necessary application must have been

installed to the computer from the CD-ROM packed together with
the machine.)

If synchronization and data transmission are performed normally, it

is OK.

For operating procedures, refer to the Operation Manual.

SL5500: Use Docking Station (CE-ST7).

SL5000: Use Docking Station (CE-ST6).

Open "DIAG MENU (1/3)".

Connect a stereo headphone or a speaker with amplifier to the stereo headphone jack.
(Do not put the stereo headphone in the ears because it produces too big sounds.)

Tap "No.9 Earphone."

Operation

Display

Test content

Chec k the d is-
play on the right.

Audio Sampling

Recording test (Outputs from stereo L-ch, loops in the PWB to microphone input)

Audio Out Left

Stereo Headphone Jack L-ch test (Recorded data above are outputted.)

Press "OK" key.

Audio Off

Press "OK" key.

Audio Out Right

Stereo Headphone Jack R-ch test ( (Recorded data above

are outputted.)

Press "OK" key.

Audio Muting

Mute circuit (Q605-related) - Test for no sound

Press "OK" key.

Audio Volume Check

Volume (IC301/IC604) - Test of step-by-step variations in sound volume

Automatic

MonoAudio Check

Recorded data

are outputted from ANALOG OUT (IC501) .:Sub PWB's sounder

sounds.

Press "OK" key.

Returns to the menu by "OK"
key.

Execute the above test and check the actual sounds.

Summary of Contents for Zaurus SL-5500





















































































Search results

Summary of Contents for Zaurus SL-5500

Reviews:

Related manuals for Zaurus SL-5500

Brands by name

Popular brands

Sharp Zaurus SL-5500, Service Manual

Search results

Summary of Contents for Zaurus SL-5500

Reviews:

Related manuals for Zaurus SL-5500

Brands by name

Popular brands