Sharp Zaurus SL-5500 Service Manual Download Page 42

Page: 42 / 84

PC-UM10M

SL-5500 DISASSEMBLY AND ASSEMBLY

– 41 –

Key PWB Shielding Sheet attachment

(1) Clean and remove oil with IPA from the contact pins of the

PWB.

(2) Separate the Separation Paper of the Shielding Sheet.

(3) Fit the right and left notches of the Shielding Sheet with the cab-

inet pawl which are engaged with the PWB.

9. Sliding Sheet A (x 2) attachment

(1) Separate the Sliding Sheet from the Mount Sheet.

(2) Attach the sheet according to the attachment reference of the

Shielding Sheet.

(3) After attaching, press the Sliding Sheet along the shape of the

Shielding Sheet.

10. Slide Cover Panel Fixing Tape (x 2) attachment

(1) Clean and remove oil with IPA from the Fixing Tape Attachment

section of the Slide Cover Panel.

(2) Separate the Slide Cover Panel Fixing Tape from the Mount

Sheet.

(3) Attach the Slide Cover Panel Fixing Tape to the Slide Cover

Panel.

Note: Attach the tape so that it does not cover the rib.

Note: Be careful that the sheet must not cover the cabinet pawl

and screws.

Corner attachment reference

Attachment reference: X direction: Inside reference

Y direction: Lead edge of the projec-

t i o n o f t h e S h i e l d i n g
Sheet

Note: Check that the Sliding Sheet does not cover the Shielding

Sheet attachment reference. If it does, push away with a
stick, etc.

-0.1

+0.1

+0.5

-0

Attachment reference

Must not cover the steps of the
PWB Shielding Sheet.

-0

-1

Summary of Contents for Zaurus SL-5500





















































































Search results

Summary of Contents for Zaurus SL-5500

Reviews:

Related manuals for Zaurus SL-5500

Brands by name

Popular brands

Sharp Zaurus SL-5500, Service Manual

Search results

Summary of Contents for Zaurus SL-5500

Reviews:

Related manuals for Zaurus SL-5500

Brands by name

Popular brands