11/8/24
08_XL-E171DVH_EN.fm
E-28
8
7
6
5
4
3
2
1
MP3/WMA playback (USB Audio Function) (continued)
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the RANDOM
button repeatedly until “Repeat One”
appears. Press the / (CD/USB / ) button.
To repeat all tracks:
Press the RANDOM
button repeatedly until “Repeat All”
appears. Press the / (CD/USB / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on page 28
and then press the RANDOM
button repeatedly until
“Repeat All” appears.
To cancel repeat play:
Press the RANDOM
button repeatedly until “Normal”
appears and “
” disappears.
Caution:
●
After performing repeat play, be sure to press the
(CD/USB ) button. Otherwise, the disc will play
continuously.
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold the RANDOM
button on the remote control
until “Random” appears. Press the / button.
To cancel random play:
Press and hold the RANDOM
button until “RDM” indicator
disappear.
Notes:
●
If you press the
button during random play, you can
move to the track selected next by the random operation.
On the other hand, the button does not allow you to move
to the previous track. The beginning of the track being
played will be located.
●
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
To cancel the programmed play mode:
During programmed stop mode, press the button. The
display will show “Memory Clear” and all the programmed
contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press and hold MEMORY
button, and then press MEMORY button repeatedly to go
to the last programme memory. Then follow steps 2 - 3 to
add tracks. The new tracks will be stored after the last track
of the previous programme.
Note:
During the programme operation, random play is not
possible.
■
Repeat play
■
Random play
■
Programmed play (MP3/WMA)
1
Whilst in the stop mode, press and hold the MEMORY
button to enter the programming save mode.
2
Press cursor
or
button on the remote control to
select the desired folder.
Then press the
or
button on the remote control
to select the desired tracks.
3
Press the MEMORY button to save the folder and track
number.
4
Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5
Press the / button to start playback.
