11/8/24
08_XL-E171DVH_EN.fm
E-7
System connections
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
●
The first time the unit is plugged in, the unit will enter
the demonstration mode.
●
To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power stand-
by mode. The unit will enter the low power consumption
mode.
●
To return to the demonstration mode, press the DEMO/
DIMMER button again.
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Make sure to unplug the AC power lead before making any connections.
Right
speaker
FM aerial
To video input socket
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Video cable
(not supplied)
Red
Black
Left
speaker
TV
Label is located at the
bottom of the unit.
■
Aerial connection
■
Speaker connection
●
Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
●
Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can damage
the unit.
●
Do not mistake the right and the
left channels. The right speaker is
the one on the right side when you
face the unit.
Incorrect
●
Do not let the bare speaker wires touch each other.
●
Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
●
Do not stand or sit on the speakers. You may be
injured.
■
Demonstration mode
■
AC power connection
