E-16
ENGLISH
WF-1100W
1
2008/November/6
WF-1100W_MK2-EN
MK2
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Speaker section
Radio
Tape recorder
Power source
AC 110 - 127/220 - 240 V ~ 50/60 Hz
DC 15 V
, (UM/SUM-1, HP-2 or R20) x
10
Power consumption
32 W
Output power
PMPO: 200 W (Total) (AC operation)
MPO: 50 W (25 W + 25 W) (AC operation,
10% T.H.D)
RMS: 25 W (12.5 W + 12.5 W)
(AC operation,10% T.H.D)
Output terminal
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Input terminals
Mixing Microphone: 600 ohms
AUX IN: 350 mV/47 kohms
Dimensions
Width: 300 mm (11-13/16")
Height: 240 mm (9-29/64")
Depth: 220 mm (8-11/16")
Weight
3.9 kg (8.6 lbs.) without batteries
Type
2-way type
Speakers
12 cm (4-3/4") Free-edge + Piezo
Speaker x 2
Maximum input
power
25 W
Rated input power
12.5 W
Impedance
6 ohms
Dimensions
Width: 235 mm (9-1/4")
Height: 262 mm (10-5/16")
Depth: 220 mm (8-11/16")
Weight
1.6 kg (3.5 lbs.)/each
...
Frequency range
FM: 88 - 108 MHz
SW1: 2.3 - 7.3 MHz
SW2: 7.3 - 22 MHz
MW: 540 - 1600 kHz
Frequency response
60 - 10,000 Hz (Normal tape)
Signal/noise ratio
40 dB
Wow and flutter
0.15% (WRMS)
Motor
DC 9 V electric governor
Bias system
AC bias
Erase system
Magnet erase
