E-11
ENGLISH
WF-1100W
2008/November/6
WF-1100W_MK2-EN
MK2
Recording to a cassette tape (continued)
Recording from the radio
Beat cancel switch:
If a whilstling noise occurs when recording from an MW, SW1 or
SW2 station, set the BEAT CANCEL switch to A, B or C, whichever
gives the best reception.
Recording from the built-in microphone
Notes:
Do not connect anything to the MIX MIC socket.
Monitoring of the recording is not possible.
Recording from the built-in microphone is not in stereo.
Dubbing from tape to tape
1
Tune in to the desired station (See page 8).
2
Load a cassette into the TAPE 1 cassette compartment.
3
Press the PAUSE button of TAPE 1.
4
Press the RECORD button of TAPE 1, which also engages
the PLAY button.
5
Press the PAUSE button of TAPE 1 again to begin
recording.
RECORD
PAU
S
E
PLAY
DIRECTION
PLAY
A
C
B
BEAT CANCEL
FUNCTION
FINE TUNING
TUNING
DUBBING SPEED
BUILT-IN
MIC
TAPE 1
TAPE 2
1
Set the FUNCTION switch to TAPE.
2
Set the DUBBING SPEED switch to MIC.
3
Load a cassette into the TAPE 1 cassette compartment.
4
Press the PAUSE button of TAPE 1.
5
Press the RECORD button of TAPE 1, which also engages
the PLAY button.
6
Press the PAUSE button again to begin recording.
1
Set the FUNCTION switch to TAPE.
2
Load a pre-recorded cassette into the TAPE 2 cassette
compartment. Insert a blank tape into the TAPE 1 cassette
compartment.
3
Set the DUBBING SPEED switch to NORMAL for normal
speed dubbing, HIGH for high-speed dubbing.
4
Press the PAUSE of TAPE 1.
5
Press the RECORD button of TAPE 1, which also engages
the PLAY button.
6
Choose either side A(1) or side B(2) of TAPE 2 with the
DIRECTION switch.
7
Press the PLAY button of TAPE 2.
The PAUSE button of TAPE 1 will be released automatically
and dubbing from TAPE 2 to TAPE 1 will begin
(Synchronous dubbing start).
Tape Recording
