manualshive.com logo in svg

Sharp ViewCam Slim VL-AX1S, Operation Manual, Page: 85 / 124

Share
Download
Sharp ViewCam Slim VL-AX1S Operation Manual Download Page 85

Advanced Features

68 

Selecting the Audio
Playback Mode

Available mode:

TAPE-VCR

You can select any of the following audio
playback modes.

3

Turn the CONTROL dial to select 

V

,

then press the dial.

4

Turn the CONTROL dial to select
“AUDIO”, then press the dial.

5

Turn the CONTROL dial to select the
desired audio playback mode, then
press the dial.

6

Press the MENU button to turn off the
menu screen.

• The selected audio playback mode

indicator appears.

Note:

• The audio playback mode indicator, “AUDIO”,

displays in different colours depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, while a green
indicates 16-bit.

E F F E C T

P L A Y B A C K

P I C .
MULTI

F R AME

A U D I O D U B
A U D I O
R E T U RN

S E T

1

1

2

+ 2

AUD I O

1 2

+

Audio 1+2

• 12-bit recording in stereo (Audio 1 and

Audio 2 channels)

• 16-bit recording in stereo (left and right

channels)

Audio 1

• 12-bit recording in stereo (Audio 1 channel

only)

• 16-bit recording in mono (left channel only)

Audio 2

• 12-bit recording in stereo (Audio 2 channel

only)

• 16-bit recording in mono (right channel

only)

1

Play back a Mini DV cassette with
dubbed audio.

2

Press the MENU button until the menu
screen appears.

A UD I O 1 2

+

Audio playback mode indicator

Summary of Contents for ViewCam Slim VL-AX1S





























































































































Reviews:

No comments