Basic Operations
Playback
Basic Operations
29
2
Connect the camcorder to your TV (or
VCR) with the supplied audio/video
cable as shown.
3
Turn on the TV and set it to the “AV” or
“VIDEO” channel. (See the operation
manual of your TV.)
• When connecting to a TV via a VCR, turn
on the VCR and set it to the “AV” or
“LINE” input channel. Operate the TV as
you normally do to view the signal from
the VCR. (See the operation manuals of
your TV and VCR.)
4
Set the POWER switch on the
camcorder to VCR, and begin playback
(see page 26).
About the S-video socket
S-video sockets are used to separately pass
the chroma (colour) and luminance (bright-
ness) components of video signals. They serve
to improve the picture quality in both recording
and playback.
0
VIDEO
AUDIO
(L/MONO)
AUDIO
(R)
21-pin Euro-SCART on TV or VCR
Video
RCA/21-pin Euro-SCART
conversion connector
(QSOCZ0033TAZZ)
Audio R
Audio L
Notes:
• If your TV or VCR has a 21-pin Euro-SCART
connector, use the RCA/21-pin Euro-SCART
conversion connector (QSOCZ0033TAZZ).
• If your TV or VCR has only one audio input jack,
use the white plug for the audio connection on
the TV or VCR.
• If your TV or VCR has an S-video input socket,
you can connect it to the S-VIDEO socket on the
camcorder with a commercially available S-video
cable.
• When the camcorder is connected to a TV for
playback, the picture on the TV screen may
flicker if the volume on the camcorder is set to
maximum. Should this occur, turn the volume
down (see page 26).
• Close the jack cover after use.
POWER
TV/VCR SET UP
CHANNEL
REC
PLAY
STOP/
EJECT
PAUSE
/STILL
:
S-video cable (commercially available)
To AV jack
The arrow shows the signal flow.
Audio/video cable
(supplied)
To S-VIDEO socket
Yellow: To video input jack
White: To audio input (L) jack
Red: To audio input (R) jack
S-video cable: To S-video input socket
