Sharp UX-BA50 Operation Manual Download Page 26

Page: 26 / 123

Connecting the Telephone Line Cord

Connecting the Telephone Line Cord

Insert one end of the telephone line cord into the adapter. Insert the other end
of the line cord into the socket on the back of the machine marked

TEL. LINE

Plug the adapter into the telephone socket on the wall.

Setting the dial mode

The fax machine is set for tone dialling. If you are on a pulse dial line, you
must set the fax machine for pulse dialling. Press the panel keys as follows:

Press

once and

3 times.

Press

once and

4 times.

Press

once.

Select the dial mode:

TONE:

PULSE:

Press

to exit.

Note:

For all units installed in New Zealand, select "1" for tone dialling. The pulse

setting "2" will not operate correctly and must not be used.

Display:

The display briefly shows
your selection, then:

OPTION SETTING

DIAL MODE

PSEUDO RING

1=TONE, 2=PULSE

TEL.SET

TEL.LINE

For Australia

For New Zealand

all.book Page 24 Tuesday, August 3, 2004 11:08 AM

Summary of Contents for UX-BA50




























































































































Search results

Summary of Contents for UX-BA50

Reviews:

Related manuals for UX-BA50

Brands by name

Popular brands

Sharp UX-BA50, Operation Manual

Search results

Summary of Contents for UX-BA50

Reviews:

Related manuals for UX-BA50

Brands by name

Popular brands