Sharp UX-40 Operation Manual Download

Page: 61 / 110

Adjusting the Resolution and Contrast

2. Sendi

Doc

ments

Load the document(s).

•

The document must be loaded
before the resolution and contrast
can be adjusted.

Press the

RESOLUTION/

RECEPTION MODE

key one or

more times until the desired
resolution and contrast settings
appear in the display.

•

The first time you move through
the list of resolution settings, the
contrast setting AUTO will appear
next to each resolution setting. The
second time you move through the
list, the contrast setting DARK will
appear.

STANDARD :AUTO

FINE :AUTO

SUPER FINE :AUTO

HALF TONE :AUTO

STANDARD :DARK

FINE :DARK

SUPER FINE :DARK

HALF TONE :DARK

Note:

In order to transmit in SUPER FINE resolution, the receiving fax

machine must also have that resolution. If it doesn’t, your machine will auto-
matically step down to the next best available setting.

RESOLUTION/

RECEPTION MODE

al l - ux40. book Page 39 Thur s day, November 18, 1999 2: 35 PM

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for UX-40















































































































Search results

Summary of Contents for UX-40

Reviews:

Related manuals for UX-40

Brands by name

Popular brands

Sharp UX-40, Operation Manual

Search results

Summary of Contents for UX-40

Reviews:

Related manuals for UX-40

Brands by name

Popular brands