Sharp UX-40 Operation Manual Download

Page: 60 / 110

Adjusting the Resolution and Contrast

Adjusting the Resolution and Contrast

If desired, you can adjust the resolution and contrast before sending a
document.

Note:

The resolution and contrast settings are only effective for sending and

copying a document. They are not effective for receiving a document.

Resolution settings

Contrast settings

STANDARD

Use STANDARD for ordinary documents.
This setting gives you the fastest and most
economical transmission.

FINE

Use FINE for documents containing small
letters or fine drawings.

SUPER FINE

Use SUPER FINE for documents containing
very small letters or very fine drawings.

HALF TONE

Use HALF TONE for photographs and
illustrations. The original will be reproduced
in 64 shades of gray.

AUTO

Use AUTO for normal documents.

DARK

Use DARK for faint documents.

You must adjust the
resolution and/or
contrast each time you
don’t want to use the
default settings.

The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.

al l - ux40. book Page 38 Thur s day, November 18, 1999 2: 35 PM

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for UX-40















































































































Search results

Summary of Contents for UX-40

Reviews:

Related manuals for UX-40

Brands by name

Popular brands

Sharp UX-40, Operation Manual

Search results

Summary of Contents for UX-40

Reviews:

Related manuals for UX-40

Brands by name

Popular brands