manualshive.com logo in svg

Sharp UX-40, Operation Manual

Share
Download
Sharp UX-40 Operation Manual Download Page 56

Transmittable Documents

34

Note: 

Letters or graphics on the edges of a document will not be 

scanned.

Other restrictions

♦

The scanner cannot recognise yellow, greenish yellow, or light blue 
ink.

♦

Ink, glue, and correcting fluid on documents must be dry before 
they pass through the document feeder.

♦

All clips, staples, and pins must be removed from documents before 
loading in the feeder. If these are not removed, they may damage 
the machine.

♦

Documents which are patched, taped, torn, smaller than the mini-
mum size, carbon backed, easily smudged, or have a slippery 
coated surface should be copied on a photocopying machine, and 
the copy loaded in the feeder.

4 mm

4 mm

5 mm

5 mm

Letters in the 
shaded area will 
not be scanned.

al l - ux40. book    Page  34    Thur s day,   November   18,   1999    2: 35  PM

Downloaded from: 

http://www.usersmanualguide.com/

Summary of Contents for UX-40















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands