Sharp UX-40 Operation Manual Download

Page: 62 / 110

Sending a Fax by Normal Dialling

Sending a Fax by Normal Dialling

With Normal Dialling, you pick up the handset (or press the

SPEAKER

key) and dial by pressing the number keys.

♦

If a person answers, you can talk with them through the handset
before sending the fax. (If you pressed the

SPEAKER

key, you

must pick up the handset to talk.)

♦

Normal Dialling allows you to listen to the line and make sure the
other fax machine is responding.

Load the document(s).

The display will show:

Pick up the handset or press the

SPEAKER

key. Listen for the dial

tone.

READY TO SEND

Dial the number of the receiving
machine by pressing the number keys.

(Example)

SPEAKER

•

Set the resolution and/or contrast if
desired.

RESOLUTION

RECEPTION MODE

al l - ux40. book Page 40 Thur s day, November 18, 1999 2: 35 PM

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for UX-40















































































































Search results

Summary of Contents for UX-40

Reviews:

Related manuals for UX-40

Brands by name

Popular brands

Sharp UX-40, Operation Manual

Search results

Summary of Contents for UX-40

Reviews:

Related manuals for UX-40

Brands by name

Popular brands