117
KEY OPERATOR PROGRAMS
Key operator programs
P23 Auto Clear Setting
Use P23 to set the time interval to return the copier to the initial settings
after the last copy of a run has been completed. The time can be set
from 10 to 240 seconds in 10 second increments.
When P23 is entered, the following message will appear.
P23: AUTO CLEAR SETTING.
SET THE TIME FOR AUTO CLEAR ––0
(10 TO 240 SECONDS, 0:CANCEL).
PRESS THE START KEY AFTER ENTRY.
1.
Set the desired time interval using the 10–key pad.
●
If you enter 0, the auto clear will be disabled.
2.
Press the START key.
P24 Add or Change Extra Preset Ratio
One extra preset copy ratio can be added within either the reduction
range (50% to 99%) or the enlargement range (101% to 200%). Only
the added preset copy ratio can be changed. The standard preset
copy ratios are fixed in memory and cannot be changed.
When P24 is entered, the following message will appear.
P24: ADD OR CHANGE EXTRA PRESET RATIO.
USE ZOOM KEYS TO SELECT NEW PRESET
RATIO AND PRESS THE START KEY.
PRESENT –––%, NEW –––%.
1.
Enter the desired copy ratio using the ZOOM keys.
●
To cancel the extra preset ratio, skip this step and proceed to
step 2.
2.
Press the START key.
P25 Setting a Maximum Number of Copies
Use P25 to limit the maximum number of copies per copy run which
can be input in the copy quantity display.
When P25 is entered, the following message will appear.
P25: SETTING A MAXIMUM NUMBER OF
COPIES.
ENTER THE NUMBER AND PRESS THE
START KEY. –––
Input the number using the 10-key pad and press the
START key.
●
A number from 1 to 999 can be set.
Summary of Contents for SF-2052
