Sharp SF-2052, Operation Manual

Page: 128 / 134

126
KEY OPERATOR PROGRAMS
Key operator programs
P76 Disabling of Stapler
Program P76 is used to enable or disable the stapler of an optional
staple sorter. If the stapler malfunctions, it can be disabled to prevent
further malfunction or possible damage to the stapler until it is
serviced.
When P76 is entered, the following message will appear.
P76: DISABLING OF STAPLER.
1.YES 2.NO
To disable the stapler, press key 1.
To enable the stapler, press key 2.
P77 Disabling of Covers and Inserts Mode
Program P77 is used to prevent the selection of COVERS and
INSERTS modes.
When P77 is entered, the following message will appear.
P77: DISABLING OF COVERS AND INSERTS
MODE.
1.YES 2.NO
To disable the COVERS and INSERTS modes, press key 1.
To restore use of the modes, press key 2.
P83 Enabling of PC/Modem Access
Program P83 is used to determine whether persons other than
persons who know the key operator code number will be permitted
access via a computer or other equipment, either directly or through
a telephone line, to the copier’s key operator programs.
When P83 is entered, the following message will appear.
P83: ENABLING OF PC/MODEM ACCESS.
1.YES 2.NO
To permit remote access to key operator programs without
key operator code entry, press key 1.
To require key operator code entry for access, press key 2.
NOTE:
The customers must choose the setting of this program by
themselves. If “YES” is selected, external operators can access the
key operator programs from a computer or other equipment without
key operator code entry. If “NO” is selected, external operators must
enter the key operator code to access the key operator programs.
(The factory default setting is “NO”.)