7
BEFORE OPERATION
Website:
http://www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)
ENERGY SAVE MODE
Your oven has an Energy Save Mode. This facility saves electricity when the oven is not in use.
When you have unpacked your oven and assembled the turntable correctly (please refer to page 2) plug the
oven into your electricity supply. Open & close the door. “0” will appear on the display. The oven is now
ready for use.
The oven will default to Energy Save Mode after 3 minutes if not used. In Energy Save Mode the display is
blank and the oven cannot be operated.
To cancel Energy Save Mode:
i) Open & close the door. “0” will be displayed and the oven is ready for use.
ii) Set the clock. Please refer to “Setting the clock” on page 8. (To revert back to Energy Save Mode, follow
the procedure below).
Note: If you unplug your oven at any stage you will have to reset the clock to cancel Energy Save Mode.
To start Energy Save Mode when the clock is set.
1. Make sure the correct
time appears on the
display.
2. Press the
KITCHEN TIMER/
CLOCK SET
key three times.
3. Press the
START/AUTO MINUTE
key. The power will be off and the
display will show nothing.
x3
x1
Your oven has an energy save mode.
1. Plug in the oven. Nothing will appear on the
display at this time.
2. Open the door, the display will flash the message
shown opposite.
3. Close the door. The display wil show “.0”. If you
set the clock “energy save” mode will be off. If
you keep “energy save” mode, go to step 5.
4. Set the clock, refer to page 8.
5. Heat the oven using the upper and lower grills
without food for 20 minutes. (For operation, see
NOTES on page 10).
1.
2.
3.
R-774M O/M 28/03/2001 15:18 Page 7
http://www.usersmanualguide.com/