7
BEFORE OPERATION
SETTING THE CLOCK
ENGLISH
Your oven comes pre-set for Energy Save Mode so when you first plug it in nothing will appear on the
digital display.
To operate the oven in Energy Save Mode:
1. Plug in the oven. Nothing will appear on the display at this time.
2. Open the door. The oven display will show “.0”.
3. Close the door.
4. Heat the oven without food (See page 11).
NOTE:
You can change to Clock Set Mode if you prefer, see below. If you decide to set the clock, Energy
Save Mode does not work.
In Energy Save Mode, if you do not operate the oven for 2 minutes or more (i.e. closing the door,
pressing the
STOP
key, or at the end of cooking), you will not be able to operate the oven until you
open and close the oven door.
If this occurs during cooking, the programme will be
erased. The time of day will also be erased.
5.
When you want to reset the time of day, follow the
above example again.
6.
If you do not set the clock, press the
STOP
button
once. “.0” will appear on the display. When the
operation of the oven is finished, “.0” will reappear
on the display instead of the time of day.
7.
If you set the clock, energy save mode does not work.
There are two setting modes: 12 hour clock and 24 hour clock.
x1
1.
To set the 12 hour clock, press the
CLOCK
button once, as shown:
Example:
To set the 24 hour clock to 23:35:
x2
1.
Choose the 24 hour clock by
pressing the
CLOCK
button
twice.
2.
Set the hours. Rotate the
TIME/
WEIGHT
dial clockwise until the
correct hour is displayed.
3.
Change from hours to
minutes by pressing the
CLOCK
button once.
Check the display.
4.
Set the minutes.
5.
Start the clock.
NOTES:
1.
You can rotate the
TIME/WEIGHT
dial clockwise or
counter clockwise.
2.
Press the
STOP
button if you make a mistake during
programming.
3.
If the oven is in cooking mode and you wish to know
the time of day, touch the
CLOCK
button.
As long as your finger is touching the button, the time
of day will be displayed.
4.
If the electrical power supply to your microwave oven
is interrupted, plug in the oven again, then open and
close the door. The display will show: “.0”.
x2
2.
To set the 24 hour clock, press the
CLOCK
button twice, as shown:
x1
x1
R-6781J English 31/08/2004 16:15 Page 7