-69
Appendix
Check
Problem
Page
Picture is green on
INPUT 1 (COMPONENT)/
INPUT 2 (COMPONENT).
Picture is pink (no green)
on INPUT 1 (RGB)/
INPUT 2 (RGB).
Picture is too bright and
whitish.
The cooling fan
becomes noisy.
The lamp does not light
up even after the
projector turns on.
The lamp suddenly turns
off during projection.
The image sometimes
flickers.
The lamp takes a long
time to turn on.
Picture is dark.
•
Change the input signal type setting.
•
Image adjustments are incorrectly set.
•
When temperature inside the projector increases, the cooling
fan runs faster.
•
The lamp indicator is illuminating in red.
Replace the lamp.
•
Cables incorrectly connected to the projector or the connected
equipment works improperly.
•
If this happens frequently, replace the lamp.
•
The lamp will eventually need to be changed.
The lamp has reached the end of its life. Replace the lamp.
46
44
—
62
23, 25-28
65
65
This projector is equipped with a microprocessor. Its performance could be adversely affected by
incorrect operation or interference. If this should happen, unplug the projector and plug it in again
after more than 5 minutes.
Summary of Contents for Notevision PG-MB60X
Page 78: ...SHARP CORPORATION ...
