-20
Projecting a Reversed Image
Projection from behind the Screen
■
Place a translucent screen between the projector and the audience.
■
Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page
57
.)
Projection Using a Mirror
■
Place a mirror (normal flat type) in front of the lens.
■
When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”
menu. (See page
57
.)
■
When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page
57
.)
Info
•
When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected
light does not shine into the eyes of the audience.
Ceiling-mount Setup
■
It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
Before mounting the projector, contact your nearest Sharp Au-
thorized Projector Dealer or Service Center to obtain the recom-
mended ceiling-mount bracket (sold separately).
•
AN-MBCM10 ceiling-mount bracket, its AN-EP101B extension
tube and AN-JT200 universal bracket, adaptor for non-level
ceiling installation (for U.S.A.).
•
AN-60KT ceiling-mount bracket, its AN-TK201 and AN-TK202
extension tubes (for countries other than the U.S.A.).
■
Invert the image by setting “C Front” in “PRJ Mode”. See
page
57
for use of this function.
Setting up the Projector
Translucent screen
Audience
Set to “Front”
Audience
Translucent screen
Mirror
Set to “Rear”
Audience
Mirror
Summary of Contents for Notevision PG-MB60X
Page 78: ...SHARP CORPORATION ...
