-65
Appendix
Optional
accessory
Lamp unit
AN-MB60LP
Removing and Installing
the Lamp Unit
Info
•
Ensure the lamp unit is removed using the
handle. Ensure the glass surface of the
lamp unit or the inside of the projector are
not touched.
•
To avoid injury to yourself and damage to
the lamp, ensure to carefully follow the
steps below.
•
Do not loosen other screws except for the
lamp unit cover and lamp unit.
1
Press
on the projector or
on the remote control to put
the projector into standby mode.
•
Wait until the cooling fan stops.
Warning!
•
Do not remove the lamp unit from the
projector right after use. The lamp and
parts around the lamp will be very hot
and may cause burn or injury.
2
Disconnect the power cord.
•
Unplug the power cord from the AC
socket.
•
Leave the lamp until it has fully cooled
down (about 1 hour).
3
Remove the lamp unit cover.
•
Turn the projector over. Loosen the user
service screw (
1
) that secures the lamp
unit cover. Pressing the tab, remove the
lamp unit cover (
2
).
1
2
User service screw
(for lamp unit cover)
Tab
Tab
AC socket
STANDBY button
Summary of Contents for Notevision PG-MB60X
Page 78: ...SHARP CORPORATION ...
