Sharp Notevision PG-MB60X Operation Manual Download

Page: 22 / 84

-18

Storing the Projector

Lens cap

Fixing band

Info

How to Use the
Storage Case

When storing the projector, attach the lens
cap to the lens, and place it in the supplied
storage case.

Open the cover of the storage
case.

Place the projector into the stor-
age case.

•

Ensure the projector has cooled down
sufficiently before placing it in the case.

•

Ensure the lens cap is attached to the
lens for protection.

•

Place the projector into the storage
case with the lens facing the
handle.

•

Ensure the projector is held in place
by using the fixing band.

Close the cover of the storage
case.

Place the accessories in the front
pocket of the storage case.

•

This storage case is only for storing the
projector.

Summary of Contents for Notevision PG-MB60X





















































































Search results

Summary of Contents for Notevision PG-MB60X

Reviews:

Related manuals for Notevision PG-MB60X

Brands by name

Popular brands

Sharp Notevision PG-MB60X, Operation Manual

Search results

Summary of Contents for Notevision PG-MB60X

Reviews:

Related manuals for Notevision PG-MB60X

Brands by name

Popular brands