-33
Basic Operation
Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
Press
,
,
or
on the re-
mote control to select the input mode.
•••••
When pressing
'
'
'
'
'
or
"
"
"
"
"
on the projector, input
mode switches in order of :
INPUT 1
INPUT 2
INPUT 3
INPUT 4
Note
•
When no signal is received, “NO SIGNAL”
will be displayed. When a signal that the
projector is not preset to receive is received,
“NOT REG.” will be displayed.
•
The INPUT mode is not displayed when
“OSD Display” of the “Options1” menu is set
to “
” (OFF). (See page
50
.)
About the INPUT mode
Adjusting the Volume
Press
\
\
\
\
\
/
|
|
|
|
|
on the projector or VOL
/
on the remote control to ad-
just the volume.
Note
•
Pressing
or
\
will lower the volume.
Pressing
or
|
will raise the volume.
"
On-screen Display of INPUT Mode (Example)
Using RGB
Using
Component
INPUT 1/2 mode
INPUT 4 mode
Using S-Video
INPUT 3 mode
Using Video
➝
➝
Used for projecting images from
equipment that sends RGB sig-
nals or component signals con-
nected to the RGB input terminal.
Used for projecting images
from equipment connected to
the VIDEO input terminal.
Used for projecting images
from equipment connected to
the S-VIDEO input terminal.
INPUT 1/
INPUT 2
(RGB/
Component)
INPUT 3
(Video)
INPUT 4
(S-Video)
INPUT buttons
/ / /
Volume buttons
"
On-screen Display
➝
➝
➝
➝
Summary of Contents for Notevision PG-MB60X
Page 78: ...SHARP CORPORATION ...
