manualshive.com logo in svg

Sharp MX-M350-N, Operation Manual, Page: 175 / 228

Share
Download
Sharp MX-M350-N Operation Manual Download Page 175

CALLING UP AND USING A FILE

7-19

7

8

Touch the [OK] key.

9

Touch the [PRINT AND DELETE THE
DATA] key or the [PRINT AND SAVE THE
DATA] key.

If the [PRINT AND
DELETE THE DATA] key
is touched, the files will
be automatically deleted
after printing.
If the [PRINT AND SAVE
THE DATA] key is

touched, the files will be saved after printing.
If there are no files that match the search
conditions, you will return to the file list screen.

CANCEL

OK

PRINT AND DELETE THE DATA

PRINT AND SAVE THE DATA

NOTES

●

If "Auditing mode" is enabled in the administrator settings for copy mode, print mode, or document filing mode,
it will not be possible to perform batch printing of [ALL FILES].

●

To display the job tab of a mode for which "Auditing mode" is enabled in the administrator settings, the account
number must be entered.

Copy_SEC.book  19 ページ  ２００６年１２月１３日　水曜日　午後３時１分

Summary of Contents for MX-M350-N





































































































































































































































Reviews:

No comments