manualshive.com logo in svg

Sharp MX-M350-N, Operation Manual, Page: 171 / 228

Share
Download
Sharp MX-M350-N Operation Manual Download Page 171

CALLING UP AND USING A FILE

7-15

7

Calling up and using a saved file

A file saved with the document filing function can be called up and printed or manipulated as needed.
The following operations can be performed:

●

 

[Print]

 : Print the file (page 7-17).

●

 

[Send]

 : Transmit the saved file (page 7-20). The file can be transmitted by Scan to E-mail, Scan to FTP, Scan to

Network Folder, fax, or Internet fax. (All of these methods require installation of the appropriate options.)
(Page 1-11)

●

 

[Property change]

 : Change the attribute of the saved file (page 7-21).

●

 

[Move]

 : Move the file (page 7-22).

●

 

[Delete]

 : Delete the file (page 7-22).

●

 

[Detail]

 : Show details on the saved file (page 7-22).

■

General procedure for using a saved file

1

Press the [DOCUMENT FILING] key on the
operation panel.

2

Touch the [FILE FOLDER] key or the
[QUICK FILE FOLDER] key depending on
where the file is saved.

●

Touch the [FILE FOLDER] key if the file is
saved in the main folder or the custom folder.
Touch the [QUICK FILE FOLDER] key if the
file is saved in the Quick File folder.
If you touched the [FILE FOLDER] key, the
files in the main folder or the folders in the
custom folder appear. If you open the wrong
folder, touch the [MAIN FOLDER] key or the
[CUSTOM FOLDER] key and open the
correct folder.

●

If the desired file is saved in the main folder,
go to step 4. If the desired file is saved in a
custom folder, go to step 3.

●

If you touched the [QUICK FILE FOLDER]
key, the files in the Quick File folder appear.
Go to step 4.

3

Touch the key of the folder that contains
the desired file.

If there are more custom folder keys than can
appear in one screen, touch the 

 or 

 keys

to change screens.
If a password is set for the selected folder, a
password entry screen will appear. Enter the 5-
digit password with the numeric keys.

4

Touch the desired file key.

Touch the key of the file that you wish to use. 
(Parts of the screen that are framed in black are
keys that can be touched.)
A menu screen will appear. 
If a password is set for the file, a password entry
screen will appear. Enter the 5-digit password with
the numeric keys.

DOCUMENT

FILING

IMAGE SEND

COPY

JOB STATUS

SYSTEM

SETTINGS

LINE
DATA

PRINT

READY
DATA

FILE

FOLDER

QUICK FILE

FOLDER

FILE RETRIEVE

SEARCH

HDD STATUS

 

UVWXYZ

OPQRST

JKLMN

EFGHI

ABCD

CUSTOM FOLDER

CUSTOM FOLDER 1

CUSTOM FOLDER 3

CUSTOM FOLDER 5

CUSTOM FOLDER 7

CUSTOM FOLDER 2

CUSTOM FOLDER 4

CUSTOM FOLDER 6

CUSTOM FOLDER 8

ALL FOLDERS

MAIN FOLDER

SEARCH

BACK

1/1

MAIN FOLDER

SEARCH

CUSTOM FOLDER

BACK

FILE NAME

Basic specifications

Yamada

2003/10/20

2003/10/20

2003/10/20

Sato

Akata

presentaion_0903

Product_info

COPY

USER NAME

DATE

BATCH P.

1
1

Copy_SEC.book  15 ページ  ２００６年１２月１３日　水曜日　午後３時１分

Summary of Contents for MX-M350-N





































































































































































































































Reviews:

No comments