manualshive.com logo in svg

Sharp MX-M350-N, Operation Manual, Page: 158 / 228

Share
Download
Sharp MX-M350-N Operation Manual Download Page 158

7-2

OVERVIEW

Document filing function

This function can only be used on the MX-M350N/MX-M450N, or when the document filing function has been added.
The document filing function allows you to save a document image in the machine's hard disk as a data file. The
image can be called up and printed or transmitted as needed.
The scanned document image is saved when printing or transmitting a document in copy mode, printer mode, or
image send mode ("QUICK FILE" or "FILE"). A document can also be scanned and saved without being printed,
copied, or transmitted ("scan save").
To allow you to search for the file and call it up, names (user name, file name, etc.) can be assigned to the file (except
when using Quick File in copy mode or fax/image send mode).

■

Data flow

File 1

File 2

QUICK FILE FOLDER

File 1

File 2

MAIN FOLDER

CUSTOM FOLDER

A password 
can be set

A password 
can be set

A password 
can be set

Folder 1

Folder 2

Folder 3

File 1

File 2

Machine hard disk

Machine hard disk

Print

Save to machine's 
hard disk

HDD

and

Send

(facsimile or image send 
function must be required)

Printing in copy mode (Quick 
File saving, page 7-6)

Printing from a computer (printer 
data, page 7-9)

Transmission in fax/image send 
mode (filing, page 7-7)

Scanning a document only 
(scan save, page 7-10)

Data is saved by job

A user name and file name is 
specified for each saved job

A user name and file name can 
be specified for each file and 
the file saved to a folder with 
any desired name assigned.

Call up a saved 
file to reuse it.

●

A stored file can be moved to a different folder under certain conditions (page 7-22).

Copy_SEC.book  2 ページ  ２００６年１２月１３日　水曜日　午後３時１分

Summary of Contents for MX-M350-N





































































































































































































































Reviews:

No comments