Sharp MX-M350-N Operation Manual Download Page 137

Page: 137 / 228

SPECIAL MODES

5-29

Mirror image

This function is used to print a mirror image of the original. The images will be inverted in the right to left direction
on the copies.

Touch the [MIRROR IMAGE] key in the
special modes screen (2nd screen).

The [MIRROR IMAGE]
key will be highlighted to
indicate that the function
is turned on, and the
mirror image icon (

)

will appear in the upper
left of the screen.

Touch the [OK] key on the special modes
screen.

You will return to the main screen of copy mode.

B/W reverse

Black and white are reversed in the copy to create a negative image.

Touch the [B/W REVERSE] key in the
special modes screen (3rd screen).

The [B/W REVERSE]
key will be highlighted to
indicate that the function
is turned on, and the
mirror image icon (

)

will appear in the upper
left of the screen.

Touch the [OK] key in the special modes
screen.

You will return to the main screen of copy mode.

Original

Copy

To display the special modes screen...

See "General procedure for using special
functions" on page 5-2.

TRANSPARENCY

INSERTS

MULTI SHOT

MIRROR

IMAGE

CARD SHOT

About the steps that follow

If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.

To cancel the mirror image function, touch the
[MIRROR IMAGE] key in the special modes screen
(the screen of step 1).

NOTES

●

When this function is selected, the exposure mode setting (page 4-14) automatically changes to "Text".

●

Originals with large black areas (which use a large amount of toner) can be printed with black/white reverse
to reduce toner consumption.

Original

B/W reverse copy

To display the special modes screen...

See "General procedure for using special
functions" on page 5-2.

ECIAL MODES

PRINT MENU

B/W

REVERSE

About the steps that follow

If an automatic document feeder is being used,
see pages 4-7 through 4-10. If the document
glass is being used, see pages 4-11 through 4-
13.

To cancel the B/W reverse function, touch the [B/W
REVERSE] key in the special modes screen (the
screen of step 1).

Copy_SEC.book 29 ページ２００６年１２月１３日　水曜日　午後３時１分

Summary of Contents for MX-M350-N





































































































































































































































Search results

Summary of Contents for MX-M350-N

Reviews:

Sharp MX-M350-N, Operation Manual, Page: 137 / 228

Search results

Summary of Contents for MX-M350-N

Reviews: