Sharp MX-FXX1, Service Manual

Page: 15 / 80

MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 6
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of the values>
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
46-44
Purpose : Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Ultra Fine).
Section : MFP/FAX
Item : Image quality
Operation/Procedure
1) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
3) When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑
], [
↓
], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of values>
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to L, the data are saved to EEPROM
and RAM and set to item M at the same time.
46-45
Purpose : Adjustment
Function (Purpose) : Used to execute the FAX exposure level
adjustment and the individual setting
(600DPI).
Section : FAX
Item : Image quality
Operation/Procedure
1) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
0
A:
A : 50 ; AUTO
B : 50 ; EXPOSURE1
SIMULATION NO.46-43
EXPOSURE ADJUSTMENT(FAX : SUPER FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50 ; EXPOSURE2
D : 50 ; EXPOSURE3
Item Display item & Detail of display Content Default value Default value Writing
A AUTO Ultra Fine/Auto 1 to 99 50 YES
B EXPOSURE1 Ultra Fine/Exposure 1 1 to 99 50 YES
C EXPOSURE2 Ultra Fine/Exposure 2 1 to 99 50 YES
D EXPOSURE3 Ultra Fine/Exposure 3 1 to 99 50 YES
E EXPOSURE4 Ultra Fine/Exposure 4 1 to 99 50 YES
F EXPOSURE5 Ultra Fine/Exposure 5 1 to 99 50 YES
G AUTO H_TONE Ultra Fine/Auto/Half tone 1 to 99 50 YES
H EXPOSURE1 H_TONE Ultra Fine/Exposure 1/Half tone 1 to 99 50 YES
I EXPOSURE2 H_TONE Ultra Fine/Exposure 2/Half tone 1 to 99 50 YES
J EXPOSURE3 H_TONE Ultra Fine/Exposure 3/Half tone 1 to 99 50 YES
K EXPOSURE4 H_TONE Ultra Fine/Exposure 4/Half tone 1 to 99 50 YES
L EXPOSURE5 H_TONE Ultra Fine/Exposure 5/Half tone 1 to 99 50 YES
M EXECUTE MODE AUTO Print mode Ultra Fine/Auto 1 to 12 1 1 (AUTO) NO
EXP1 Ultra Fine/Exposure 1 2
EXP2 Ultra Fine/Exposure 2 3
EXP3 Ultra Fine/Exposure 3 4
EXP4 Ultra Fine/Exposure 4 5
EXP5 Ultra Fine/Exposure 5 6
AUTO H_TONE Ultra Fine/Auto/Half tone 7
EXP1 H_TONE Ultra Fine/Exposure 1/Half tone 8
EXP2 H_TONE Ultra Fine/Exposure 2/Half tone 9
EXP3 H_TONE Ultra Fine/Exposure 3/Half tone 10
EXP4 H_TONE Ultra Fine/Exposure 4/Half tone 11
EXP5 H_TONE Ultra Fine/Exposure 5/Half tone 12
0
A:
A : 50
; AUTO
B : 50 ; EXPOSURE1
SIMULATION NO.46-44
EXPOSURE ADJUSTMENT(FAX : ULTRA FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50 ; EXPOSURE2
D : 50 ; EXPOSURE3