Sharp MX-FXX1, Service Manual

Page: 13 / 80

MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 4
46-41
Purpose : Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Normal).
Section : MFP/FAX
Item : Image quality
Operation/Procedure
1) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
If there is no item over [
↓
], the display grays out and the opera-
tion is invalid.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
3) When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑
], [
↓
], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button is
pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items G are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item G after settlement of values>
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to F, the data are saved to EEPROM
and RAM and set to item G at the same time.
46-42
Purpose : Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment (Fine text).
Section : MFP/FAX
Item : Image quality
Operation/Procedure
1) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
3) When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑
], [
↓
], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
Item
Display item &
Detail of display
Content
Set
range
Default
value
A AUTO Auto 1 to 99 50
B EXPOSURE1 Exposure 1 1 to 99 50
C EXPOSURE2 Exposure 2 1 to 99 50
D EXPOSURE3 Exposure 3 1 to 99 50
E EXPOSURE4 Exposure 4 1 to 99 50
F EXPOSURE5 Exposure 5 1 to 99 50
0
A:
A
㧦
50
㧧
EXPOSURE LEVEL(ALL)
SIMULATION NO.46-40
EXPOSURE ADJUSTMENT(FAX
㧦
ALL)
50
㨇
1
㨪
99
㨉
OK
TEST
EXECUTE
CLOSE
G EXECUTE
MODE AUTO Print
mode Auto 1 1 (AUTO)
EXP1 Exposure 1 2
EXP2 Exposure 2 3
EXP3 Exposure 3 4
EXP4 Exposure 4 5
EXP5 Exposure 5 6
Item
Display item &
Detail of display
Content
Set
range
Default
value
0
A:
A
㧦
50
㧧
AUTO
B
㧦
50
㧧
EXPOSURE1
SIMULATION NO.46-41
EXPOSURE ADJUSTMENT(FAX
㧦
NORMAL)
50
㨇
1
㨪
99
㨉
OK
TEST
EXECUTE
CLOSE
C
㧦
50
㧧
EXPOSURE2
D
㧦
50
㧧
EXPOSURE3
Item Display item & Detail of display Content Set range Default value
A AUTO Fine/Auto 1 to 99 50
B EXPOSURE1 Fine/Exposure 1 1 to 99 50
C EXPOSURE2 Fine/Exposure 2 1 to 99 50
D EXPOSURE3 Fine/Exposure 3 1 to 99 50
E EXPOSURE4 Fine/Exposure 4 1 to 99 50
F EXPOSURE5 Fine/Exposure 5 1 to 99 50
G AUTO H_TONE Fine/Auto/Half tone 1 to 99 50