Sharp MX-C507P, User Manual

Page: 15 / 182

•
For FTP, type the FTP address. For example,
myServer/myDirectory
. Enter the FTP port. Port 21 is
the default port for sending commands.
•
For SMB, type the network folder address. For example,
myServer/myShare/myFile.pdf
. Type the
network domain name.
•
If necessary, select the Authentication type for FTP and SMB.
To limit access to the bookmark, enter a PIN.
Note: The application supports the following file types: PDF, JPEG, TIFF, and HTML-based web pages.
Other file types such as DOCX and XLXS are supported in some printer models.
4
Click Save .
Creating folders
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Bookmarks > Add Folder , and then type a folder name.
Note: To limit access to the folder, enter a PIN.
3
Click Save .
Note: You can create folders or bookmarks inside a folder. To create a bookmark, see “Creating bookmarks”
on page 14 .
Managing contacts
Adding contacts
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Address Book .
3
From the Contacts section, add a contact.
Note: You can assign the contact to one or more groups.
4
If necessary, specify a login method to allow application access.
5
Apply the changes.
Setting up and using the home screen applications 15