Sharp MX-5111N, Technical Handy Manual

Page: 15 / 68

SHARP
MAINTENANCE
15
Description
150K Maintenance Schedule A:
Process Section:
In addition to Black Consumable schedule (and/or colour schedule if indicated):-
Check Waste Toner Container (MX-510HB).
Replace Ozone Filter Kit (MX-C31FL).
Sim 24-04 Clear Ozone Filter Counter.
Paper Feed & Transport:
Replace Paper Dust Removal Unit (MX-310PD).
Check/Clean all Paper Path Sensors (including Duplex unit).
Check/Clean/Replace PF Rollers (check tray counter using Sim 22-09).
Sim 24-04 Clear PS Paper Counter.
General:
Clean all optics, CCD, and white reference plate.
Clean all DSPF sensors.
200K Maintenance Schedule B:
Fuser Section:
Replace Fusing Belt Kit (MX-361FB or MX-510FB )
Replace Fusing Pressure Roller Kit (MX-510LH).
Replace Web Cleaning Kit (MX-510WB).
Check & Clean Upper and Lower Thermistors.
Check & Clean Fuser Separator Pawls.
Sim 24-04 Clear Fusing Belt Counter.
Clear Separation Clean Roller.
Clear Fusing Belt Counter.
Clear Fusing Roller Counter.
Clear Press Roller Counter.
Clear Fusing Web Counter.
Perform the following, only when replacing the following fuser parts available
via service parts:-
Replace Fusing Separation Pawl Lower [PTME-0313FCZZ x4]
Sim 24-04 Clear Separate Pawl Counter.
Replace Fuser Separation Plate Upper [CPLTM8010FC03]
Sim 24-04 Clear Separate Plate Counter.
300K Maintenance Schedule C:
In addition to Maintenance Schedule A and Maintenance Schedule B every 600k
only , perform the following:-
Process Section:
Replace PTC unit (MX-230CU).
Sim 24-04 Clear PTC Counter.