26
Network function
Press
a
/
b
to select “Ethernet network
connection”, and then press
ENTER
.
Press
a
/
b
to select “Wireless network
connection”, and then press
ENTER
.
Select “Add network” , and then press
ENTER
. You can add unbroadcast wireless
network manually.
Press
a
/
b
to select an available wireless
network , and then press
ENTER
. If the
current network connection security is not
open, you should enter the password from
software keyboard by pressing
ENTER
on
the remote control. If the network connection
security is open, you can connect it directly.
Select “Refresh”, and then press
ENTER
, it
displays the “Wireless network list”.
1
1
1
3
2
2
2
Press
c
/
d
to adjust “Ethernet” to “On”.
Press
c
/
d
to adjust “Wi-Fi” to “On”, it
displays the nearly wireless network.
Enter the information about the unbroadcast
wireless network , and then select “Save”. Now
the TV is connected to the unbroadcasted
wireless network.
Ethernet network connection
Wireless network connection
Add network
w
DHCP
w
Manual connection
Press
a
/
b
to select “DHCP”. Press
c
/
d
to select
“On”. System will attempt to obtain IP address and
other information automatically.
Press
a
/
b
to select “DHCP”. Press
c
/
d
to select
“Off ”. You can setup IP , Gateway, Subnet mask,
First DNS and Second DNS following the on-screen
instructions. After setting, press
a
/
b
to select “Save”,
and now you can enjoy the internet services.
Select “Menu” in the smart home, and then press
ENTER
. Press
a
/
b
to select “Network”, and then
press
ENTER
. It displays the connect format.
Network setting
