18
General
Wallpaper setting
Skin setting
Booting state
Language
In the “Menu” , press
a
/
b
to select “General”,
and then press
ENTER
.
In the “Menu”, press
a
/
b
to select “General”,
and then press
ENTER
.
In the “Menu”, press
a
/
b
to select “General”,
and then press
ENTER
.
In the “Menu”, press
a
/
b
to select “General”,
and then press
ENTER
.
1
1
1
1
Press
c
/
d
to select “Starry Sky” or “Diamond
Shine”, and then press
ENTER
.
Press
c
/
d
to select “Colour Surge” or “Minty
Fresh”, and then press
ENTER
.
Press
c
/
d
to select “TV” or “Smart home”.
• “TV”: When turn on the TV, It displays TV mode.
• “Smart home”: When turn on the TV, it displays
the smart home.
3
3
3
2
2
2
2
Press
a
/
b
to select “Wallpaper setting”, and
then press
ENTER
.
Press
a
/
b
to select “Skin setting”, and then
press
ENTER
.
Press
a
/
b
to select “Booting state”.
Press
a
/
b
to select “Language”.
You can change the wallpaper of smart home.
You can change the skin of smart home.
You can set booting state.
You can select a language from the menu.
Select from among 3 languages: English,
繁體中文
,
簡體中文
.
Watching TV
You can set your TV as you desired by pressing
MENU
.
For general setting.
Press
c
/
d
to select desired language listed
on the screen.
3
NOTE
• Only after restarted the TV, the language of the system can
be changed.
NOTE
• The initial installation of the TV is “IQQI-Chinese Pro”.
• If you use any other input method, SHARP can not
guarantee its compatibility with television system.
Default input method
No signal power off
Sleep timer
In the “Menu”, press
a
/
b
to select “General”,
and then press
ENTER
.
In the “Menu”, press
a
/
b
to select “General”,
and then press
ENTER
.
In the “Menu”, press
a
/
b
to select “General”,
and then press
ENTER
.
1
1
1
Depending on your preferences, press
a
/
b
to select desired input method listed on the
screen, and then press
ENTER
. Press
RETURN
to save and exit.
Press
c
/
d
to select “Off” or “On”.
• Five minutes before the power shuts down, the
remaining time displays every minute.
3
3
2
2
2
Press
a
/
b
to select “IME setting”, and then
press
ENTER
.
Press
a
/
b
to select “No signal power off”.
Press
a
/
b
to select “Sleep timer”.
For setting input method.
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals.
Auto power-off at a designated time.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
Press
c
/
d
to select “
Off”, “30min.”, “60min.”,
“90min.”, “120min.” or “150min.”. Or you can
press the
SLEEP
on the remote control unit to
select.
3
