Sharp LC-32G100H, Operation Manual

Page: 37 / 52

35
You can assign each input source a label as you
prefer.
NOTE
• You cannot change labels if the input source is “TV”.
Press TV/VIDEO to select the desired input
source.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Input Label”, and then
press ENTER .
4
Labelling input sources
TV
DVD
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
Repeat the above until the name is fully spelt
out, and then press
MENU .
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
(Example)
6
Press
a
/
b
/
c
/
d
to select letters to label the
input source.
• When you want to change the input label that you
have already assigned to the default name, press
c
/
d
to move to “CLEAR” on the “Input Label”
screen, and then press ENTER .
5
Settings when using external devices
Press TV/VIDEO on the remote control unit or
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a
/
b
.
2
Press TV/VIDEO on the remote control unit or
on the TV.
1
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Selecting input source
POWER
MENU
TV/VIDEO
CH
VOL
Selecting the input source and signal type