3
Remove the cam unit.
4
Remove the transfer drum cleaner clutch.
(Note)
When the clutch section is assembled, adjust so that the
clutch sleeve A section is in the range of D cut surface width.
The adjustment is made by changing the fixing position of the
clutch spring to the clutch sleeve.
If the clutch sleeve is not set to the above range, the transfer
drum will not operate properly, causing the following troubles.
•
The transfer drum is damaged to cause streaks in print
image.
•
The transfer drum cleaning trouble results in improper
image density correction, causing improper density and
improper color balance.
(7) Transfer drum cleaner brush clutch
1
Remove the operation cabinet.
(Refer to the A-4.)
2
Remove the paper hold/transfer lower frame.
3
Remove the transfer drum cleaner unit.
Cam unit
Transfer drum cleaner clutch
D cut
D cut
Clutch sleeve
A
Clutch spring
Paper holder/transfer
lower frame
Transfer drum cleaner unit
SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
12 – 15
