Sharp FO-DC600, Service Manual, Page: 37 / 150

FO-DC600U
2S
4S
1.5S
3S
1S
4S
1.5S
4S
0.8S
4S
0.3S
4S
0.4S
4S
1S
3.5S
0.5S
3S
0.5S
3S
2S
2S
0.5S
0.5S
1S
0.2S
0.8S
0.4S
0.3S
0.2S
0.4S 0.8S
0.2S 0.2S
1S
0.5S
1S 0.5S
0.5S 0.5S
0.5S
1S
0.5S 0.5S
STANDARD
RING
PATTERN 1
for USA
RING
PATTERN 2
for USA
RING
PATTERN 3
for USA
RING
PATTERN 1
for CANADA
RING
PATTERN 2
for CANADA
RING
PATTERN 3
for CANADA
1S
3S
1S
RING
PATTERN 4
for USA
1S
SW22 No. 1 ~ No. 3 Service condition for line-1
000: Transmission is enabled. Reception mode is auto.
001: Transmission is enabled. Reception mode is manual only.
010: Transmission is disable. Reception mode is auto.
011: Transmission is disable. Reception mode is manual only.
SW22 No. 4 Reserved
Set to "0".
SW22 No. 5 Reserved
Set to "1".
SW22 No. 6 ~ No. 8 Reserved
Set to "0".
SW23 No. 1 Reserved
Set to "0".
SW23 No. 2 Reserved
Set to "1".
SW23 No. 3 Reserved
Set to "0".
SW23 No. 4 Reserved
Set to "1".
SW23 No. 5, No. 6 Reserved
Set to "0".
SW23 No. 7 Reserved
Set to "1".
SW23 No. 8 Reserved
Set to "0".
SW24 No. 1 Dial mode
Switch the type according to the telephone circuit connected to the fac-
simile.
0: PULSE DIAL
1: TONE DIAL
SW24 No. 2 Receive mode for line-2
Auto/manual receiving mode is set.
SW24 No. 3, No. 4 Reserved
Set to "0".
SW24 No. 5, No. 6 Reserved
Set to "1".
SW24 No. 7, No. 8 Reserved
Set to "0".
SW25 No. 1 ~ No. 4 Number of rings for auto-receive
(0: No ring receive)
When the machine is set in the auto receive mode, the number of rings
before answering can be selected. It may be set from one to nine rings
using a binary number. If the soft switch was set to 1, a direct connection
is made to the facsimile. If it was set to 0 accidentally, receive ring is set
to 1. If it was above 9, receive rings are set to 9.
SW25 No. 5 ~ No. 8 Reserved
Set to "0".
SW26 No. 1, No. 2 Reserved
Set to "0".
SW26 No. 3, No. 4 Reserved
Set to "1".
SW26 No. 5, No. 6 Reserved
Set to "0".
SW26 No. 7 Reserved
Set to "1".
SW26 No. 8 Reserved
Set to "0".
SW27 No. 1 Reserved
Set to "0".
SW27 No. 2 Reserved
Set to "1".
SW27 No. 3 ~ No. 8 Reserved
Set to "0".
SW28 No. 1 JBIG (Joint Bi-level Image Group)
An image compression encoding method recommended by ITU-T. It re-
alizes 2-second transmission when the power is turned on.
2 – 29
SW17 No. 1 ~ No. 7 Reserved
Set to "0".
SW17 No. 8 Reserved
Set to "1".
SW18 No. 1 Reserved
Set to "1".
SW18 No. 2 ~ No. 4 Reserved
Set to "0".
SW18 No. 5 , No. 6 Reserved
Set to "1".
SW18 No. 7 , No. 8 Reserved
Set to "0".
SW19 No. 1 Reserved
Set to "1".
SW19 No. 2 ~ No. 4 Reserved
Set to "0".
SW19 No. 5 Reserved
Set to "1".
SW19 No. 6 ~ No. 8 Reserved
Set to "0".
SW20 No. 1 ~ No. 8 Reserved
Set to "0".
SW21 No. 1 ~ No. 3 Reserved
Set to "0".
SW21 No. 4 ~ No. 6 Busy tone detection frequency
To select frequency range of signals to be detected as Busy Tone.
SW21 No. 7, No. 8 Reserved
Set to "0".
SW16 No. 5 ~ No. 8 Distinctive ringing
When the ringing setting is turned off, all of the CI signal are received.
When any of the standard, and ring patterns 1 through 3 is selected for
the ringing setting, only the selected CI signal is received.
CI signal patterns
The CI signal patterns consists of the standard pattern, and ring pat-
terns 1 through 7. The standard pattern is the conventional one.