Sharp FO-5600, Operation Manual

Page: 88 / 115

<P=003>
Setting 10: COPY SCANNING
This sets the amount by which copies are reduced before printing to ensure that data on the
edges is not cut off. Enter a number from "1" to "3" as follows:
1
:
Automatic reduction depending on the size of the original
and the printing paper.
2
:
No reduction.
3 :
Slight reduction of A4 originals. (A4 originals are reduced
slightly to ensure that data on the edges are not cut off.)
•
Initial setting: 2
Setting 11: COPY CUT-OFF
Press "1" (CONTINUE) to have documents longer than the printing paper be continued on a
second page when copied. Press "2" (CUT-OFF) to have the part outside that length not printed.
•
Initial setting: 2
Setting 12: RECEIVE REDUCE
This sets the amount by which received documents are reduced before printing to ensure that
data on the edges is not cut off. Enter a number from "1" to "3" as follows:
1
:
Automatic reduction depending on the size of the original
and the printing paper.
2
:
No reduction.
3
:
Slight reduction of A4 originals. (A4 originals are reduced
slightly to ensure that data on the edges are not cut off.)
•
Initial setting: 1
Setting 13: IMAGE MEMORY PRINT
Press "1" (YES) to have part of the first page transmitted printed when a Transaction Report is
printed out. Press "2" (NO) to turn the function off. This is only effective when transmitting from
memory.
•
Initial setting: 1
Setting 14: CASSETTE SELECTION
Press "1" if you want the fax to automatically select the source from which it draws paper for
printing according to the size of the document received or copied. If you want to set an order of
priority among the sources for drawing paper, press the appropriate key as follows depending
on whether you have one or two cassettes.
One cassette: "1": Auto Selection
"2": Give priority to the cassette.
"3": Give priority to the tray.
Two cassettes: "1": Auto Selection
"2": Upper cassette, lower cassette, tray.
"3": Lower cassette, tray, upper cassette.
"4": Tray, upper cassette, lower cassette.
"5": Tray, lower cassette, upper cassette.
"6": Lower cassette, tray, upper cassette.
"7": Upper cassette, tray, lower cassette.
•
Initial setting: 1
OPTIONAL SETTINGS
OPTION SETTINGS 5-3