manualshive.com logo in svg

Sharp ER-A411, Full Detailed Instruction Manual

Share
Download
Sharp ER-A411 Full Detailed Instruction Manual Download Page 63

63

 

■

Bill totalizing/bill transfer

NOTE

To use this function, consult your authorized SHARP dealer.

Bill totalizing

The bill totalizing function is used to totalize multiple bills when, for example, a particular guest pays not only 
his or her bill, but also the bills of other guests.

Procedure

GLU code 

G

GLU code 

G

n

(Without receipt printing)

[Payment operation]

Adding the total amount of the 
previous bill to that of the new bill

2

#

1

#

NOTE

• #1 bill and #2 bills are merged into one bill. The GLU code on the merged bill is determined by 

the last entered #2 bill. A maximum of 5 bills is available for #2.

• The GLU code of #1 must be in use. If the guest check(s) of #1 or #2 has already been handled 

by another clerk, the guest check(s) must have been made “Transferring out.”

Example

Key operation

Print

102 

G

103 

G

A

Bill transfer

This function is used to change the GLU code of a particular bill.

Procedure

(Without receipt printing)

G

n

G

New GLU code 

2

#

GLU code 

1

#

NOTE

• This function requires that the current GLU code be entered for #1 and a new GLU code be 

entered for #2.

• A #1 bill is transferred to a #2 bill. The #1 bill is then cleared and set free.

Summary of Contents for ER-A411



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands