manualshive.com logo in svg

Sharp ER-A411, Full Detailed Instruction Manual

Share
Download
Sharp ER-A411 Full Detailed Instruction Manual Download Page 206

206

iSDC Mode

In the iSDC mode, you can save and load the data of your register to and from the server using a WiFi 
SD card.
This section describes the items that can be programmed for the iSDC mode, and how to terminate the 
communication in the iSDC mode.
For details on the speci

fi

 cation of WiFi SD card and the use of iSDC mode, consult your authorized 

SHARP dealer.

 

■

Host preset

Procedure

▼

1.

 In the mode selection window, select “9 iSDC MODE”.

▼

2.

 Select “2 SETTING”.

▼

3.

 Select “1 HOST PRESET”.

The screen continues.

4.

 Program each item as follows:

• USER ID (Use the character entry)

User ID for communication service. Up to 12 characters 
can be entered.

• PASS (Password) (Use the character entry)

Password for communication service. Up to 16 characters 
can be entered.

• SCHEME (Use the selective entry)

Resource URI scheme
HTTP/HTTPS

• HOST (Use the character entry)

Server host name. Up to 30 characters can be entered.

Summary of Contents for ER-A411



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands