manualshive.com logo in svg

Sharp ER-A411, Full Detailed Instruction Manual

Share
Download
Sharp ER-A411 Full Detailed Instruction Manual Download Page 136

136

 

■

 PLU/EAN stock

You can assign a stock quantity to each PLU/EAN code.
Shown below is an example of selecting “1 OVERWRITE”.

Procedure

▼

Select a pertinent PLU code, or 
directly enter a PLU code or EAN 
code.

▼

• After selecting “1 OVERWRITE,” select a pertinent PLU/EAN 

code. Then the next screen will appear to show the following 
items:

• CURRENT (Con

fi

 rmation only)

The current stock is displayed.

• NEW STOCK (Use the numeric entry)

Enter a new stock quantity (max. 7 digits: 0 to 9999.999)

NOTE

• If you need to add or subtract a stock quantity to or 

from the current stock quantity, select “2 ADD” or 
“3 SUBTRACT” and enter a value to be added or 
subtracted.

• The entry of a new stock value will update to the PLU/

EAN stock counter.

 

■

 EAN delete

You can delete the EAN codes which have not been accessed during the period you set in this program 
when you execute the delete job in EAN DELETE in X1/Z1 mode.

Procedure

Program each item as follows:

• PERIOD (DAY) (Use the numeric entry)

Enter the EAN record delete period: 01 to 99 (00: Not delete 
by the non-accessed deleting job)

 

■

 PLU group text

You can program a maximum of 12 characters for each PLU group (0 to 99).

Procedure

Program the item as follows:

Select a pertinent PLU group from 
the list.

▼

• TEXT (Use the character entry)

Description for the PLU group. Up to 12 characters can be 
entered.

Summary of Contents for ER-A411



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands