manualshive.com logo in svg

Sharp ER-A411, Full Detailed Instruction Manual

Share
Download
Sharp ER-A411 Full Detailed Instruction Manual Download Page 141

141

 

■

 Commission

Procedure

Program each item as follows:

Select a pertinent commission no. 
from the list.

▼

• RATE (Use the numeric entry)

Percent rate (0.000 to 99.999)

• TEXT (Use the character entry)

Description for the commission. Up to 12 characters can be 
entered.

 

■

 Miscellaneous functions

Use the following procedure to select any function in the miscellaneous function group:

Procedure

Program each item as follows:

▼

1.

 In the FUNCTIONS window, select “4 MISC. FUNCTIONS”.

• The MISC. FUNCTIONS window will appear.

The screen continues.

2.

 Select any function from the following functions list.

 1 DEPOSIT

Deposit

 2 DEPO.(-)

Deposit ( - )

 3 ***RA

RA

 4 ***RA2

RA2

 5 ***PO

PO

 6 ***PO2

PO2

 7 CASH TIP

Cash tip

 8 NON CASH TIP

Non-cash tip

 9 CID

Cash in drawer

10 CHK/CG

Check change

 

■

Deposit

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered 
unreasonably amounts.
Limit amount: 0.00 to 999999.99

• TEXT (Use the character entry)

Description for the deposit. Up to 12 characters can be 
entered.

Summary of Contents for ER-A411



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands