Sharp ER-A411 Full Detailed Instruction Manual Download Page 219

Page: 219 / 226

219

Cleaning the Printer (Printer Head/Sensor/Roller)

When the printed text is getting dark or faint, paper dust may be stuck to the printer head, sensor and/or
roller. Clean them as follows:

CAUTION: Never touch the printer head with a tool or anything hard as it may damage the head.

The paper cutter is mounted on the printer cover. Be careful not to cut yourself.

Printer head

Sensor

Roller

Print roller arm

Disconnect the main plug of register.

Remove the printer cover.

Lift up the print roller arm.

Remove the paper roll referring to the “Removing

the paper roll” section.

Clean the printer head with a cotton swab or soft

rag moistened with ethyl alcohol or isopropyl
alcohol.
Clean the roller and the sensor in the same
manner.

Reset the paper roll correctly by following the

steps in “Installing the paper roll”.

Summary of Contents for ER-A411



































































































































































































































Search results

Summary of Contents for ER-A411

Reviews:

Brands by name

Popular brands

Sharp ER-A411, Full Detailed Instruction Manual

Search results

Summary of Contents for ER-A411

Reviews:

Brands by name

Popular brands