Sharp ER-A411 Full Detailed Instruction Manual Download Page 140

Page: 140 / 226

140

■

Discount key (

and

through

)

Procedure

Program each item as follows:

Select a pertinent discount key
from the list.

▼

• AMOUNT (Use the numeric entry)

Discount amount (max. 8 digits)

• TEXT (Use the character entry)

Description for the discount key. Up to 12 characters can be
entered.

• SIGN (Use the selective entry)

Programming of the + or - sign assigns the premium or
discount function to each discount key.

-: Minus amount (discount)
+: Plus amount (premium)

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99

• ENTRY TYPE (Use the selective entry)

ITEM(-): Item (-)
SBTL(-): Subtotal (-)

■

Percent key (

through

)

Procedure

Program each item as follows:

Select a pertinent percent key
from the list.

▼

• RATE (Use the numeric entry)

Percent rate (0.00 to 100.00)

• TEXT (Use the character entry)

Description for the percent key. Up to 12 characters can be
entered.

• SIGN (Use the selective entry)

Programming of the + or - sign assigns the premium or
discount function to each percent key.

-: Minus (discount)
+: Plus (premium)

• %HALO (High Amount Lockout) (Use the numeric entry)

HALO (High Amount Lockout) for the percent key (0.00 to
100.00)

• ENTRY TYPE (Use the selective entry)

ITEM%: Item %
SBTL%: Subtotal %

Summary of Contents for ER-A411



































































































































































































































Search results

Summary of Contents for ER-A411

Reviews:

Brands by name

Popular brands

Sharp ER-A411, Full Detailed Instruction Manual

Search results

Summary of Contents for ER-A411

Reviews:

Brands by name

Popular brands