21
Cable TV Connections
Connection with cable box
•
Connect as shown below. With this connection, it is possible to record descrambled CATV signals.
DVD OUT
AV 2 OUT
DIGITAL
AUDIO
AUDIO
R
L
S-VIDEO
DVD/VCR
AV 1 OUT
AUDIO
R
L
VIDEO
VCR
AV 1 IN
AUDIO
R
L
(MONO)
VIDEO
IN FROM
ANTENNA
UHF/VHF
CATV
OUT TO TV
OUTPUT
CHANNEL
3
4
ANT/CABLE
From CATV system
TV Rear
OUT
IN
Cable Box
Unit’s Rear
Coaxial
cable (Supplied)
Coaxial cable
(Not supplied)
•
If the cable box is turned off, it will not output any signals, thus making it impossible to record or view a program from
the CATV system.
•
In the case of the above connections, it is not possible to change channels using the Unit’s remote control. Only the
cable box can be used to change channels.
•
Only one channel at a time can be programmed for recording programs with the timer. It is not possible to watch a TV
program different from the one being recorded.
•
Depending on which terminals the TV has, a separate combiner (mixer) or separator (splitter) may be necessary.
After the Connection
Plug in the power cord of the TV. Then go to
EZ Set Up
(See page 26).
•
Connect as shown below. With this connection, it is not possible to record CATV programs which have been
scrambled, but is possible to record one channel and watch the other one.
•
With the above connection,
CH
'
/
"
of the Unit or the number buttons on the remote control can be used to select
channels.
•
Depending on which jacks the TV has, a combiner (mixer) or separator (splitter) may be necessary.
•
To record one channel and watch another, the Unit must be set to the TV mode.
After the Connection
Plug in the power cord of the TV. Then go to
EZ Set Up
(See page 26).
DVD OUT
AV 2 OUT
DIGITAL
AUDIO
AUDIO
R
L
S-VIDEO
DVD/VCR
AV 1 OUT
AUDIO
R
L
VIDEO
VCR
AV 1 IN
AUDIO
R
L
(MONO)
VIDEO
IN FROM
ANTENNA
UHF/VHF
CATV
OUT TO TV
OUTPUT
CHANNEL
3
4
ANT/CABLE
Cable Box
TV Rear
OUT
IN
From
CATV
system
Unit’s Rear
Coaxial
cable
(Supplied)
Coaxial cable
(Not supplied)