55
Normal Picture
Poor Tracking
Playback
Tracking Control System
Automatic
This function automatically adjusts the tracking to match the
recorded tape. Auto tracking engages in the following cases:
•
When you insert the cassette and begin playback.
•
When you press
CH (TRACKING)
'
/
"
on the Unit at the same
time.
•
When the VCR has been playing back an unrecorded
section of tape, and then reaches a recorded tape segment.
When auto tracking engages, “PLAY” on the TV screen flashes for a
few seconds.
Manual
When a poorly recorded tape is played back or the Unit is near an
electrical or magnetic field, auto tracking may not operate normally.
In this event, manually adjust the tracking with
CH (TRACKING)
'
/
"
to make any noise disappear.
Blue Screen Noise Elimination
Set the BLUE SCREEN mode to ON on the SET UP-selection screen.
(See
Mode Selection
on page 31.) This function eliminates monitor
noise and mutes sound during playback of unrecorded portions of a
tape, and when receiving a non-broadcasting channel. Blue Screen
will also appear if the Unit is set to the Auxiliary mode but no video
signal is fed to the Unit. (The BLUE SCREEN mode is set to ON at
the factory.)
•
Blue Screen does not function during still picture, variable slow motion
and video search.
•
Blue Screen may not function properly if the broadcast signal is too
strong or too weak.
•
Blue Screen does not function during playback of a tape with noise
recorded.
•
If the antenna signal is weak while recording a TV program, or if the
input signal is weak while tape dubbing, the monitor screen may turn
blue since the unit may not recognize whether or not a proper signal is
being received. In this event, set the BLUE SCREEN mode to OFF.
Automatic Head Cleaning System
When the tape is inserted, or ejected, this system automatically
cleans the drum and heads with a special roller before recording or
playback begins, protecting the heads and drum from dirt and
preserving beautiful sound and picture quality.
100
OPEN/
CLOSE
POWER
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
TV/VCR
EJECT
FUNCTION
CONTROL
PROGRAM
ZOOM
CANCEL
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
VCR DVD
AM/PM
INPUT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
CH /
PLAY
REW
PLAY STOP
VCR / DVD COMBINATION
OPEN/
CLOSE
VCR DVD
(AV 1 )
EJECT/STOP
POWER
STANDBY
CH(TRACKING)
L(MONO)-AUDIO-R
AV 2 IN VDEO
CH (TRACKING) /
