Sharp DM-2000, Service Manual

Page: 43 / 80

Main
code Sub
code
Contents Details of operation
Initial
value
Set range
26 32 Fan rotation duty change
state setup The currently set fan motor rotation duty is displayed with the following
numbers. After entering the set value, press the start key to store the
set value. 0 0.1
38 Cancel of stop at drum
life over The currently set value is displayed. After entering the set value, press
the start key to store the set value. 0 0
∼
1
42 Transfer timing adjustment After completion of warm up, shading is performed and the currently set
transfer timing adjustment value is displayed. 5 1, 3, 5, 7, 9
50 Black-white reversion
function setup The current setup of black-white reversion is displayed with the following
numbers. After entering the set value, press the start key to store the
set value. 0 0.1
51 Sort/Group copy
temporary stop function
setup
<E-sort is required>
Used to set whether temporary stop for every 250-sheet print (150-sheet
print when the job separator is installed) is made or not during copying
with the sort/group function. The current setup is displayed with the
following numbers. After entering the set value, press the start key to
store the set value. 1 0.1
30 1 Machine sensor operation
check Used to check the sensors in the machine transport system with LED on
the operation panel.
41 2 OC document sensor
adjustment Used to read the document sensor input value with paper and perform
the sensor detection level adjustment. For the adjustment procedure of
the document sensor input value, refer to the previous descriptions.
Key operation/Display
0: Operating 50%, standby 30%
1: Operating 80%, standby 50%
Key operation/Display
0: The machine stops at drum life over.
1: The machine does not stop at drum life over.
Key operation
Transfer timing adjustment
value: Copy quantity keys
“1”: 240 ms “7”: 300 ms
“3”: 260 ms “9”: 320 ms
“5”: 280 ms
Key operation/Display
0: Black-white reversion function enabled
1: Black-white reversion function disabled
Key operation/Display
0: Does not stop.
1: Stops.
Display
<Lighting at sensor ON>
Paper entry sensor: Machine position JAM LED
Duplex sensor: SPF JAM LED
Paper exit sensor: JAM LED
No. 2 cassette transport sensor: No. 2 cassette position LED
No. 3 cassette transport sensor: No. 3 cassette position LED
No. 4 cassette transport sensor: No. 4 cassette position LED
Drum initial SW: DRUM LED
DM-2000
7 – 8