4. Contents of simulations
Main
code
Sub
code
Contents
Details of operation
Initial
value
Set range
1
1
Mirror unit operation check
Used to execute scanning at the speed corresponding to the set
magnification ratio.
100%
50
∼
200%
2
Optical system sensor
operation check
Used to check MHPS (Mirror home position sensor) ON/OFF state with
the LED on the operation panel.
2
1
SPF aging
<SPF is required>
Used to perform SPF document transport.
The paper size is not detected. (Excluding postcards, extra large sheet
of 1m or greater.)
With SPF installed: Single transport operation
With RSPF installed: Duplex transport operation
100%
50
∼
200%
2
SPF sensor operation
check
<SPF is required>
Used to check sensors in SPF with the LED on the operation panel.
3
SPF motor forward
rotation operation check
<SPF is required>
Used to rotate the SPF motor forward for 10 sec.
4
SPF motor reverse
rotation operation check
<SPF is required>
Used to rotate the SPF motor reversely for 10 sec.
8
SPF paper feed solenoid
operation check
<SPF is required>
Used to drive the SPF paper feed solenoid (PSOL) at the cycle of 500
msec ON and 500 msec OFF 20 times.
9
RSPF reverse solenoid
operation check
<Not used>
Used to drive the RSPF reverse solenoid (RSOL) at the cycle of 500
msec ON and 500 msec OFF 20 times.
10
RSPF paper exit gate
solenoid operation check
<Not used>
Used to drive the RSPF paper exit gate solenoid (GSOL) at the cycle of
500 msec ON and 500 msec OFF 20 times.
11
SPF PS release solenoid
operation check
<SPF is required>
Used to drive the SPF PS release solenoid at the cycle of 500 msec ON
and 500 msec OFF 20 times.
3
2
Shifter job separator
sensor operation check
Used to check the sensors state in the shifter job separator with the
LED on the operation panel.
Key operation
Display
Changing the magnification ratio:
Fixed magnification ratio key
ZOOM UP KEY, ZOOM DOWN
KEY
Set magnification ratio:
Fixed magnification ratio LED
ZOOM LED
Display
<Lighting when the sensor is ON>
MHPS: Paper empty LED
Key operation
Display
Changing the magnification ratio:
Fixed magnification ratio key
ZOOM UP KEY, ZOOM DOWN
KEY
Set magnification ratio:
Fixed magnification ratio LED
ZOOM LED
Display
<Lighting at sensor ON>
PW1: JAM LED
PW2: Paper empty LED
PW3: Machine position JAM LED
PW4: SPF JAM LED
PL1: Manual paper feed tray select LED
PL2: Second cassette position JAM LED
P-IN: SPF select LED
SPF COVER OPEN: Main cassette select LED
Display
<Lighting at sensor ON>
Shifter HP sensor: Machine position JAM LED
Job separator HP sensor: SPF JAM LED
Paper exit full sensor: Second cassette position JAM LED
DM-2000
7 – 2
