CD-DV999W
E-59
ENGLISH
T
ape Recording
CD-DV999W (
Z
)
TINSZA017AWZZ
H
Recording from a CD (CDs)
You can record the desired CD using the DIRECT PLAY button.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button.
3
Load a cassette into the TAPE 2 cassette compartment with
the side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the
button to choose one side or both sides.
… To record on both sides.
… To record on only one side.
5
Press the
I6
button.
Recording will be paused.
6
Press one of the
s
1 -
s
5 buttons to select the desired
disc.
7
Within 5 seconds, press the DIRECT PLAY button to start
recording.
I
Recording starts from side A.
I
Recording is started from the selected CD. When the playback of
the last track is finished or the end of the tape is reached, the CD
and the cassette will stop automatically.
I
CD playback will start approximately 7 seconds after the tape starts.
To stop recording:
Press the
■
button.
The CD and tape will stop.
Disappears after a while
Recording to a cassette tape (continued)
Recording from several CDs continuously:
1. Perform steps 1 - 6 in “Recording from a CD (CDs)”.
2. Within 5 seconds, press the
0
button to record on side A, or the
1
button
for side B.
To perform programmed recording:
1. Programme discs and tracks. (See page 47.)
2. Press the
I6
button.
3. Press the
0
button to record on side A, or the
1
button for side B.
To stop recording:
Press the
H
button.
The CD and tape will stop.
Note:
To record on both sides, begin with side A. (If recording is started from side B,
the tape will not switch over to side A.)
Auto restart function:
If the recording side is switched from side A to B during recording, the system
will record the interrupted track on side B from its beginning. The recording will
be made without cutting the beginning of the track on side B.
*DV999W_EP56-60
04.3.4, 17:49
59